| タイトル | High Temperature Transparent Furnace Development |
| 本文（外部サイト） | http://hdl.handle.net/2060/19970025570 |
| 著者（英） | Bates, Stephen C. |
| 著者所属（英） | Thoughtventions Unltd. |
| 発行日 | 1997-04-01 |
| 言語 | eng |
| 内容記述 | This report describes the use of novel techniques for heat containment that could be used to build a high temperature transparent furnace. The primary objective of the work was to experimentally demonstrate transparent furnace operation at 1200 C. Secondary objectives were to understand furnace operation and furnace component specification to enable the design and construction of a low power prototype furnace for delivery to NASA in a follow-up project. The basic approach of the research was to couple high temperature component design with simple concept demonstration experiments that modify a commercially available transparent furnace rated at lower temperature. A detailed energy balance of the operating transparent furnace was performed, calculating heat losses through the furnace components as a result of conduction, radiation, and convection. The transparent furnace shells and furnace components were redesigned to permit furnace operation at at least 1200 C. Techniques were developed that are expected to lead to significantly improved heat containment compared with current transparent furnaces. The design of a thermal profile in a multizone high temperature transparent furnace design was also addressed. Experiments were performed to verify the energy balance analysis, to demonstrate some of the major furnace improvement techniques developed, and to demonstrate the overall feasibility of a high temperature transparent furnace. The important objective of the research was achieved: to demonstrate the feasibility of operating a transparent furnace at 1200 C. |
| NASA分類 | Fluid Mechanics and Heat Transfer |
| レポートNO | 97N25066
NASA-CR-202333
NAS 1.26:202333
E-10689 |
| 権利 | No Copyright |
|
