| タイトル | Influence of crack history on the stable tearing behavior of a thin-sheet material with multiple cracks |
| 本文（外部サイト） | http://hdl.handle.net/2060/19950008053 |
| 著者（英） | Dawicke, D. S.; Amstutz, B. E.; Sutton, M. A.; Newman, J. C., Jr. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 1994-09-01 |
| 言語 | eng |
| 内容記述 | Fracture tests were conducted on 2.3mm thick, 305mm wide sheets of 2024-T3 aluminum alloy with from one to five collinear cracks. The cracks were introduced (crack history) into the specimens by three methods: saw cutting, fatigue precracking at a low stress range, and fatigue precracking at a high stress range. For the single crack tests, the initial crack history influenced the stress required for the onset of stable crack growth and the first 10mm of crack growth. The effect on failure stress was about 4 percent or less. For the multiple crack tests, the initial crack history was shown to cause differences of more than 20 percent in the link-up stress and 13 percent in failure stress. An elastic-plastic finite element analysis employing the CTOA fracture criterion was used to predict the fracture behavior of the single and multiple crack tests. The numerical predictions were within 7 percent of the observed link-up and failure stress in all the tests. |
| NASA分類 | STRUCTURAL MECHANICS |
| レポートNO | 95N14467 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/109762 |
|
