| タイトル | Improved construction materials for polar regions using microcellular thermoplastic foams |
| 本文（外部サイト） | http://hdl.handle.net/2060/19940025978 |
| 著者（英） | Cunningham, Daniel J. |
| 著者所属（英） | Axiomatics Corp. |
| 発行日 | 1994-02-01 |
| 言語 | eng |
| 内容記述 | Microcellular polymer foams (MCF) are thermoplastic foams with very small cell diameters, less than 10 microns, and very large cell densities, 10(exp 9) to 10(exp 15) cells per cubic centimeter of unfoamed material. The concept of foaming polymers with microcellular voids was conceived to reduce the amount of material used for mass-produced items without compromising the mechanical properties. The reasoning behind this concept was that if voids smaller than the critical flaw size pre-existing in polymers were introduced into the matrix, they would not affect the overall strength of the product. MCF polycarbonate (PC), polystyrene (PS), and polyvinyl chloride (PVC) were examined to determine the effects of the microstructure towards the mechanical properties of the materials at room and arctic temperatures. Batch process parameters were discovered for these materials and foamed samples of three densities were produced for each material. To quantify the toughness and strength of these polymers, the tensile yield strength, tensile toughness, and impact resistance were measured at room and arctic temperatures. The feasibility of MCF polymers has been demonstrated by the consistent and repeatable MCF microstructures formed, but the improvements in the mechanical properties were not conclusive. Therefore the usefulness of the MCF polymers to replace other materials in arctic environments is questionable. |
| NASA分類 | NONMETALLIC MATERIALS |
| レポートNO | 94N30483 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
|
