| タイトル | Planform curvature effects on flutter characteristics of a wing with 56 deg leading-edge sweep and panel aspect ratio of 1.14 |
| 本文（外部サイト） | http://hdl.handle.net/2060/19920003836 |
| 著者（英） | Keller, Donald F.; Pinkerton, Theresa L.; Sandford, Maynard C. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 1991-09-01 |
| 言語 | eng |
| 内容記述 | An experimental and analytical investigation was initiated to determine the effects of planform curvature (curving the leading and trailing edges of a wing in the X-Y plane) on the transonic flutter characteristics of a series of three moderately swept wing models. Experimental flutter results were obtained in the Langley Transonic Dynamics Tunnel for Mach numbers from 0.60-1.00, with air as the test medium. The models were semispan cantilevered wings with a 3 percent biconvex airfoil and a panel aspect ratio of 1.14. The baseline model had straight leading and trailing edges (i.e., no planform curvature). The radii of curvature of the leading edges for these two models were 200 and 80 inches. The radii of curvature of the leading edges of the other two models were determined so that the root and tip chords were identical for all three models. Experimental results showed that flutter-speed index and flutter frequency ratio increased as planform curvature increase (radius of curvature of the leading edge was decreased) over the test range of Mach numbers. Analytical flutter results were calculated with a subsonic flutter-prediction program, and they agreed well with the experimental results. |
| NASA分類 | AIRCRAFT DESIGN, TESTING AND PERFORMANCE |
| レポートNO | 92N13054
NAS 1.60:3116
NASA-TP-3116
L-16858 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/129787 |
