| タイトル | Application of laminar flow control to supersonic transport configurations |
| 本文（外部サイト） | http://hdl.handle.net/2060/19900016628 |
| 著者（英） | Parikh, P. G.; Nagel, A. L. |
| 著者所属（英） | Boeing Commercial Airplane Co. |
| 発行日 | 1990-07-01 |
| 言語 | eng |
| 内容記述 | The feasibility and impact of implementing a laminar flow control system on a supersonic transport configuration were investigated. A hybrid laminar flow control scheme consisting of suction controlled and natural laminar flow was developed for a double-delta type wing planform. The required suction flow rates were determined from boundary layer stability analyses using representative wing pressure distributions. A preliminary design of structural modifications needed to accommodate suction through a perforated titanium skin was carried out together with the ducting and systems needed to collect, compress and discharge the suction air. The benefits of reduced aerodynamic drag were weighed against the weight, volume and power requirement penalties of suction system installation in a mission performance and sizing program to assess the net benefits. The study showed a feasibility of achieving significant laminarization of the wing surface by use of a hybrid scheme, leading to an 8.2 percent reduction in the cruise drag. This resulted in an 8.5 percent reduction in the maximum takeoff weight and a 12 percent reduction in the fuel burn after the inclusion of the LFC system installation penalties. Several research needs were identified for a resolution of aerodynamics, structural and systems issues before these potential benefits could be realized in a practical system. |
| NASA分類 | AERODYNAMICS |
| レポートNO | 90N25944
NAS 1.26:181917
NASA-CR-181917 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/137112 |
