| タイトル | Small Displacement, Long Life On-Orbit Compressor Design and Fabrication |
| 本文（外部サイト） | http://hdl.handle.net/2060/19900009173 |
| 著者（英） | Gerlach, C. R.; Schroeder, E. C.; Deffenbaugh, D. D.; Masetta, J. P. |
| 著者所属（英） | NASA Johnson Space Center |
| 発行日 | 1989-05-01 |
| 言語 | eng |
| 内容記述 | The focus is the generation of technology and fabrication of prototype hardware applicable to seven Space Station compressor system applications. The compressors are of the single acting reciprocating piston type and, in general, may be termed miniature in size compared with normal commercially available equipment. The initial technology development is focused on improved valve designs, and the control of pulsations and heating effects in order to increase compressor efficiency and reduce cycle temperatures, thus permitting significantly increased stage pressure ratios. The initial test compressor was successfully operated at pressure ratios of up to 50:1, and this significant extension of allowable pressure ratio will result in a reduction of the number of required stages and, hence, total hardware thereby reducing system weight and volume. These experiments have also identified the need to employ low shaft speeds, on the order of 250 to 500 rpm, to enhance heat transfer and increase life. The prototype compressor currently being designed, is to be driven by a low-speed brushless dc motor sealed in a case common to the compressor drive mechanism case. The compressor and motor case will communicate with stage suction pressure so that any minor gas leakage past the piston rings will be returned to the suction. Emphasis in this prototype design is being placed on simplicity, durability, commonality of components, and high efficiency. |
| NASA分類 | ENGINEERING (GENERAL) |
| レポートNO | 90N18489 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/138880 |
|
