タイトル | Simulation and control problems in elastic robots |
本文(外部サイト) | http://hdl.handle.net/2060/19900000782 |
著者(英) | Baruh, H.; Tadikonda, S. S. K. |
著者所属(英) | Rutgers Univ. |
発行日 | 1989-05-01 |
言語 | eng |
内容記述 | Computational issues associated with modeling and control of robots with revolute joints and elastic arms are considered. A manipulator with one arm and pinned at one end is considered to investigate various aspects of the modeling procedure and the model, and the effect of coupling between the rigid-body and the elastic motions. The rigid-body motion of a manipulator arm is described by means of a reference frame attached to the shadow beam, and the linear elastic operator denoting flexibility is defined with respect to this reference frame. The small elastic motion assumption coupled with the method of assumed modes is used to model the elasticity in the arm. It is shown that only terms up to quadratic in these model amplitudes need to be retained. An important aspect of the coupling between the rigid-body and the elastic motion is the centrifugal stiffening effect. This effect stiffens the elastic structure, as to be expected on physical grounds, gives rise to a time-varying inertia term for the rigid-body motion, and, in general, results in an effective inertia term smaller than the rigid-body inertia term. Simulation results are presented for an elastic beam pinned at one end and free at the other, and rotating in a horizontal plane, and control issues such as the order of the model, number of sensors, and modal extraction are examined within this context. |
NASA分類 | SPACECRAFT DESIGN, TESTING AND PERFORMANCE |
レポートNO | 90N10098 |
権利 | No Copyright |
URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/140412 |
|