タイトル | Measurement uncertainty for the Uniform Engine Testing Program conducted at NASA Lewis Research Center |
本文(外部サイト) | http://hdl.handle.net/2060/19870019124 |
著者(英) | Abdelwahab, Mahmood; Silver, Dean; Biesiadny, Thomas J. |
著者所属(英) | NASA Lewis Research Center |
発行日 | 1987-05-01 |
言語 | eng |
内容記述 | An uncertainty analysis was conducted to determine the bias and precision errors and total uncertainty of measured turbojet engine performance parameters. The engine tests were conducted as part of the Uniform Engine Test Program which was sponsored by the Advisory Group for Aerospace Research and Development (AGARD). With the same engines, support hardware, and instrumentation, performance parameters were measured twice, once during tests conducted in test cell number 3 and again during tests conducted in test cell number 4 of the NASA Lewis Propulsion Systems Laboratory. The analysis covers 15 engine parameters, including engine inlet airflow, engine net thrust, and engine specific fuel consumption measured at high rotor speed of 8875 rpm. Measurements were taken at three flight conditions defined by the following engine inlet pressure, engine inlet total temperature, and engine ram ratio: (1) 82.7 kPa, 288 K, 1.0, (2) 82.7 kPa, 288 K, 1.3, and (3) 20.7 kPa, 288 K, 1.3. In terms of bias, precision, and uncertainty magnitudes, there were no differences between most measurements made in test cells number 3 and 4. The magnitude of the errors increased for both test cells as engine pressure level decreased. Also, the level of the bias error was two to three times larger than that of the precision error. |
NASA分類 | AIRCRAFT PROPULSION AND POWER |
レポートNO | 87N28557 NAS 1.15:88943 NASA-TM-88943 E-3234 |
権利 | No Copyright |
URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/149047 |
|