| タイトル | Structural design of a vertical antenna boresight 18.3 by 18.3-m planar near-field antenna measurement system |
| 本文（外部サイト） | http://hdl.handle.net/2060/19840024712 |
| 著者（英） | Trimarchi, P. A.; Wanhainen, J. S.; Sharp, G. R. |
| 著者所属（英） | NASA Lewis Research Center |
| 発行日 | 1984-01-01 |
| 言語 | eng |
| 内容記述 | A large very precise near-field planar scanner was proposed for NASA Lewis Research Center. This scanner would permit near-field measurements over a horizontal scan plane measuring 18.3 m by 18.3 m. Large aperture antennas mounted with antenna boresight vertical could be tested up to 60 GHz. When such a large near field scanner is used for pattern testing, the antenna or antenna system under test does not have to be moved. Hence, such antennas and antenna systems can be positioned and supported to simulate configuration in zero g. Thus, very large and heavy machinery that would be needed to accurately move the antennas are avoided. A preliminary investigation was undertaken to address the mechanical design of such a challenging near-field antenna scanner. The configuration, structural design and results of a parametric NASTRAN structural optimization analysis are contained. Further, the resulting design was dynamically analyzed in order to provide resonant frequency information to the scanner mechanical drive system designers. If other large near field scanners of comparable dimensions are to be constructed, the information can be used for design optimization of these also. |
| NASA分類 | INSTRUMENTATION AND PHOTOGRAPHY |
| レポートNO | 84N32783
NASA-TM-83781
E-2274
NAS 1.15:83781 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/158475 |
