| タイトル | Pressure distributions on a 0.04-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley unitary plan wind tunnel |
| 本文（外部サイト） | http://hdl.handle.net/2060/19830022194 |
| 著者（英） | Bradley, P. F.; Flanagan, P. F.; Siemers, P. M., III; Henry, M. W. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 1983-03-01 |
| 言語 | eng |
| 内容記述 | Pressure distribution tests on a 0.04-scale model of the forward fuselage of the Space Shuttle Orbiter are presented without analysis. The tests were completed in the Langley Unitary Plan Wind Tunnel (UPWT). The UPWT has two different test sections operating in the continuous mode. Each test section has its own Mach number range. The model was tested at angles of attack from -2.5 deg to 30 deg and angles of sideslip from -5 deg to 5 deg in both test sections. The test Reynolds number was 6.6 x 10 to the 6th power per meter. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel model was also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation has provided a means for comparisons between reentry flight pressure data and wind-tunnel data. |
| NASA分類 | ASTRONAUTICS (GENERAL) |
| レポートNO | 83N30465
NASA-TM-84628
NAS 1.15:84628 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/161968 |
