| タイトル | Critical research and advanced technology (CRT) support project |
| 本文（外部サイト） | http://hdl.handle.net/2060/19830012090 |
| 著者（英） | Furman, E. R.; Lowell, C. E.; Anderson, D. N.; Nainiger, J. J.; Schultz, D. F.; Hodge, P. E. |
| 著者所属（英） | NASA Lewis Research Center |
| 発行日 | 1983-02-01 |
| 言語 | eng |
| 内容記述 | A critical technology base for utility and industrial gas turbines by planning the use of coal-derived fuels was studied. Development tasks were included in the following areas: (1) Combustion - investigate the combustion of coal-derived fuels and methods to minimize the conversion of fuel-bound nitrogen to NOx; (2) materials - understand and minimize hot corrosion; (3) system studies - integrate and focus the technological efforts. A literature survey of coal-derived fuels was completed and a NOx emissions model was developed. Flametube tests of a two-stage (rich-lean) combustor defined optimum equivalence ratios for minimizing NOx emissions. Sector combustor tests demonstrated variable air control to optimize equivalence ratios over a wide load range and steam cooling of the primary zone liner. The catalytic combustion of coal-derived fuels was demonstrated. The combustion of coal-derived gases is very promising. A hot-corrosion life prediction model was formulated and verified with laboratory testing of doped fuels. Fuel additives to control sulfur corrosion were studied. The intermittent application of barium proved effective. Advanced thermal barrier coatings were developed and tested. Coating failure modes were identified and new material formulations and fabrication parameters were specified. System studies in support of the thermal barrier coating development were accomplished. |
| NASA分類 | ENERGY PRODUCTION AND CONVERSION |
| レポートNO | 83N20361
NAS 1.15:83019
E-1455
NASA-TM-83019
DOE/NASA/10350-35 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/163170 |
