| タイトル | Experimental and analytical transonic flutter characteristics of a geared-elevator configuration |
| 本文（外部サイト） | http://hdl.handle.net/2060/19800016826 |
| 著者（英） | Doggett, R. V., Jr.; Gregory, R. A.; Ruhlin, C. L. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 1980-06-01 |
| 言語 | eng |
| 内容記述 | The flutter model represented the aft fuselage and empennage of a proposed supersonic transport airplane and had an all movable horizontal tail with a geared elevator. It was tested mounted from a sting in the transonic dynamics tunnel. Symmetric flutter boundaries were determined experimentally at Mach numbers from 0.7 to 1.14 for a geared elevator configuration (gear ratio of 2.8 to 1.0) and an ungeared elevator configuration (gear ratio of 1.0 to 1.0). Gearing the elevator increased the experimental flutter dynamic pressures about 20 percent. Flutter calculations were made for the geared elevator configuration by using two analytical methods based on subsonic lifting surface theory. Both methods analyzed the stabilizer and elevator as a single, deforming surface, but one method also allowed the elevator to be analyzed as hinged from the stabilizer. All analyses predicted lower flutter dynamic pressures than experiment with best agreement (within 12 percent) for the hinged elevator method. Considering the model as mounted from a flexible rather than rigid sting in the analyses, had only a slight effect on the flutter results but was significant in that a sting related vibration mode was identified as a potentially flutter critical mode. |
| NASA分類 | AIRCRAFT DESIGN, TESTING AND PERFORMANCE |
| レポートNO | 80N25321
NASA-TP-1666
L-13544 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/172354 |
