| タイトル | Experimental investigation of three helicopter rotor airfoils designed analytically |
| 本文（外部サイト） | http://hdl.handle.net/2060/19790013866 |
| 著者（英） | Bingham, G. J.; Noonan, K. W. |
| 著者所属（英） | Army Aviation Research and Development Command|NASA Langley Research Center |
| 発行日 | 1979-04-01 |
| 言語 | eng |
| 内容記述 | Three helicopter rotor airfoils designed analytically were investigated in a wind tunnel at Mach numbers from about 0.30 to 0.90 and Reynolds from about 0.8 to 2.3 x 10 to the 6th power. The airfoils had thickness-to-chord ratios of 0.08, 0.10, and 0.12 with maximum thickness at 40 percent chord. The camber distribution of each section was the same with maximum camber at 35 percent chord. The 10-percent-thick airfoil was also investigated at Reynolds numbers from 4.8 to 9.4 x 10 to the 6th power. The drag divergence Mach number of the 10-percent-thick airfoil is about 0.83 at a normal-force coefficient of 0 and about 0.72 at a normal-force coefficient of 0.6 at Reynolds numbers near 9 x 10 to the 6th power. The maximum normal-force coefficient is slightly less than that of the NACA 0012 airfoil tested in the same facility. The results indicate that a qualitative evaluation of the drag divergence can be made at normal-force coefficients up to the onset of boundary-layer separation by analytically predicting the onset of sonic flow at the airfoil crest. The qualitative results are conservative with respect to experimental values with the experimental drag divergence Mach number up to 0.05 higher than that indicated by analysis. |
| NASA分類 | AERODYNAMICS |
| レポートNO | 79N22037
AVRADCOM-TR-79-11
L-11703
NASA-TP-1396 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/175806 |
