タイトル | Technological development of cylindrical and flat shaped high energy density capacitors |
本文(外部サイト) | http://hdl.handle.net/2060/19780016515 |
著者(英) | Zelik, J. A.; Parker, R. D. |
著者所属(英) | Hughes Aircraft Co. |
発行日 | 1977-12-01 |
言語 | eng |
内容記述 | Cylindrical wound metallized film capacitors rated 2 micron F 500 VDC that had an energy density greater than 0.3 J/g, and flat flexible metallized film capacitors rated at 2 micron F 500 VDC that had an energy density greater than 0.1 J/g were developed. Polysulfone, polycarbonate, and polyvinylidene fluoride (PVF2) were investigated as dielectrics for the cylindrical units. PVF2 in 6.0 micron m thickness was employed in the final components of both types. Capacitance and dissipation factor measurements were made over the range 25 C to 100 C, and 10 Hz to 10 kHz. No pre-life-test burning was performed, and six of ten cylindrical units survived a 2500 hour AC plus DC lift test. Three of the four failures were infant mortality. All but two of the flat components survived 400 hours. Finished energy densities were 0.104 J/g at 500 V and 0.200 J/g at 700 V, the energy density being limited by the availability of thin PVF2 films. |
NASA分類 | ELECTRONICS AND ELECTRICAL ENGINEERING |
レポートNO | 78N24458 P77-594 NASA-CR-135286 |
権利 | No Copyright |
URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/178834 |