タイトル | Coatings for directional eutectics |
本文(外部サイト) | http://hdl.handle.net/2060/19760022282 |
著者(英) | Jackson, M. R.; Rairden, J. R. |
著者所属(英) | General Electric Co. |
発行日 | 1976-07-25 |
言語 | eng |
内容記述 | Significant advances have been made in the development of an environmentally stable coating for a very high strength, directionally solidified eutectic alloy designated NiTaC-13. Three duplex (two-layer) coatings survived 3,000 hours on a cyclic oxidation test (1,100 C to 90 C). These coatings were fabricated by first depositing a layer of NiCrAl(Y) by vacuum evaporation from an electron beam heated source, followed by depositing an aluminizing overlayer. The alloy after exposure with these coatings was denuded of carbide fibers at the substrate/coating interface. It was demonstrated that TaC fiber denudation can be greatly retarded by applying a carbon-bearing coating. The coating was applied by thermal spraying followed by aluminization. Specimens coated with NiCrAlCY+Al survived over 2,000 hours in the cyclic oxidation test with essentially no TaC denudation. Coating ductility was studied for coated and heat-treated bars, and stress rupture life at 871 C and 1,100 C was determined for coated and cycled bars. |
NASA分類 | COMPOSITE MATERIALS |
レポートNO | 76N29370 NASA-CR-135050 SRD-76-076 |
権利 | No Copyright |
URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/184933 |
|