| タイトル | Flowfield analysis for successive oblique shock wave-turbulent boundary layer interactions |
| 本文（外部サイト） | http://hdl.handle.net/2060/19760012293 |
| 著者（英） | Childs, M. E.; Sun, C. C. |
| 著者所属（英） | Washington Univ. |
| 発行日 | 1976-03-01 |
| 言語 | eng |
| 内容記述 | A computation procedure is described for predicting the flowfields which develop when successive interactions between oblique shock waves and a turbulent boundary layer occur. Such interactions may occur, for example, in engine inlets for supersonic aircraft. Computations are carried out for axisymmetric internal flows at M 3.82 and 2.82. The effect of boundary layer bleed is considered for the M 2.82 flow. A control volume analysis is used to predict changes in the flow field across the interactions. Two bleed flow models have been considered. A turbulent boundary layer program is used to compute changes in the boundary layer between the interactions. The results given are for flows with two shock wave interactions and for bleed at the second interaction site. In principle the method described may be extended to account for additional interactions. The predicted results are compared with measured results and are shown to be in good agreement when the bleed flow rate is low (on the order of 3% of the boundary layer mass flow), or when there is no bleed. As the bleed flow rate is increased, differences between the predicted and measured results become larger. Shortcomings of the bleed flow models at higher bleed flow rates are discussed. |
| NASA分類 | FLUID MECHANICS AND HEAT TRANSFER |
| レポートNO | 76N19381
NASA-CR-2656 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/186705 |
