| タイトル | Incidence angle bounds for lip flow separation of three 13.97-centimeter-diameter inlets |
| 本文（外部サイト） | http://hdl.handle.net/2060/19760011039 |
| 著者（英） | Luidens, R. W.; Abbott, J. M. |
| 著者所属（英） | NASA Lewis Research Center |
| 発行日 | 1976-02-01 |
| 言語 | eng |
| 内容記述 | Low speed wind tunnel tests were conducted to establish a procedure for determining inlet-lip flow separation and to make preliminary examination of the incidence angle bounds for lip flow separation on inlets intended for the nacelles of STOL (short takeoff and landing) aircraft. Three inlets were tested. Two of the inlets had short centerbodies with lower lip area contraction ratios of 1.30 and 1.44. The third inlet had a cylindrical centerbody extended forward into the inlet throat with a lower lip area contraction ratio of 1.44. The inlets were sized to fit a 13.97 centimeter-diameter fan. For inlet throat Mach numbers less than about 0.43, the lip flow separation angle was increased by either increasing the ratio of throat velocity to freestream velocity (Vt/Vo) or by increasing the lower lip area contraction ratio. For throat Mach numbers greater than a certain value (ranging from 0.43 to 0.52), increasing throat Mach number in some cases resulted in a decrease in the lip flow separation angle. Extending a cylindrical centerbody into the inlet throat increased the flow separation angle for nearly all values of Vt/Vo. |
| NASA分類 | AIRCRAFT PROPULSION AND POWER |
| レポートNO | 76N18127
E-8523
NASA-TM-X-3351 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/187006 |
