| タイトル | Instruction manual, optical effects module electronic controller and processor, model OEMCP |
| 本文（外部サイト） | http://hdl.handle.net/2060/19760008289 |
| 著者所属（英） | Advanced Kinetics, Inc. |
| 発行日 | 1975-11-14 |
| 言語 | eng |
| 内容記述 | The OEM-1 electronic module is discussed; it is comprised of four subsystems: the signal processing and display; the stepper motor controls; the chopper controls; and the dc-dc invertor. The OEM-1 module controls the sample wheel so that the relative transmittance of the samples can be compared to the clear aperture position. The 3-1/2 digit digital voltmeter displays the clear aperture signal level as well as the ratio of the remaining sample positions relative to the clear aperture position. The sample wheel position is decoded so that the signals and ratios can be correlated to the data. The OEM is automatically reset to the I sub o on initial turn-on and can be reset to the '0' position by actuating a front panel switch. The sample wheel can be interrupted to change samples or induce a longer integration time if desired by a front panel command. Integration times from 1 - 50 seconds are provided at the front panel, and BCD data for external interfacing is provided. |
| NASA分類 | ELECTRONICS AND ELECTRICAL ENGINEERING |
| レポートNO | 76N15377
NASA-CR-144125
REPT-1054-303 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/187462 |
