| タイトル | Analysis of helicopter rotor blade torsional oscillations due to stall |
| 本文（外部サイト） | http://hdl.handle.net/2060/19750023949 |
| 著者（英） | Crimi, P. |
| 著者所属（英） | Avco Corp. |
| 発行日 | 1975-09-01 |
| 言語 | eng |
| 内容記述 | An analysis of stall-induced helicopter rotor blade torsional oscillations was carried out, the primary objectives being to predict the onset and severity of the oscillations and their relationship to aircraft and blade parameters. Blade flapping, flapwise bending, and torsional degrees of freedom were taken into account, with radial variation in aerodynamic loading determined from a previously developed dynamic stall model. Results of analyses were compared with data from flight tests of helicopters. Analyses were carried out while parametrically varying blade vibrational characteristics. It was found that the amplitudes of the higher harmonics of torsional oscillations can be significantly reduced by either reducing the torsional natural frequency or introducing viscous damping in the torsional degree of freedom. A preliminary investigation was conducted to determine the feasibility and practicality of alleviating the stall problem by means of boundary layer control. The results indicate that boundary layer control would be effective in reducing the higher harmonics of torsional oscillations due to stall and that its implementation would not require excessive power or suction rates. |
| NASA分類 | AERODYNAMICS |
| レポートNO | 75N32022
NASA-CR-2573 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/188681 |
|
