| タイトル | Bearing endurance tests in vacuum for sputtered molybdenum disulfide films |
| 本文（外部サイト） | http://hdl.handle.net/2060/19750006982 |
| 著者（英） | Spalvins, T. |
| 著者所属（英） | NASA Lewis Research Center |
| 発行日 | 1975-01-01 |
| 言語 | eng |
| 内容記述 | Angular-contact, 440C stainless steel, ball bearings with sputtered MoS2 films 0.0000006 x 10-7m (6000 A) thick were evaluated in a vacuum bearing chamber (1750 rpm, 137.9-N- (31-lbf-) thrust load) for endurance. Two types of sputtered films were evaluated: (1) MOS2 sputtered directly onto bearing components, and (2) a thin 0.0000001 x 10-7m (1000 A) underlayer of Cr3Si2 subsequently sputtered with MoS2. Bearing test evaluations in vacuum showed that endurance lives of more than 1000 hours (105,000,000 cycles) were obtained with bearings (cage, races, and balls) directly sputtered with MoS2. The same endurance lives were also obtained when only the races and cage were sputtered with an underlayer of Cr3Si2 and subsequently with MoS2. |
| NASA分類 | MECHANICAL ENGINEERING |
| レポートNO | 75N15054
E-8166
NASA-TM-X-3193 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/191544 |
|
