| タイトル | Development of sputtered techniques for thrust chambers, task 1 |
| 本文（外部サイト） | http://hdl.handle.net/2060/19740020846 |
| 著者（英） | Hecht, R. J.; Mullaly, J. R.; Schmid, T. E. |
| 著者所属（英） | Pratt and Whitney Aircraft |
| 発行日 | 1974-03-01 |
| 言語 | eng |
| 内容記述 | Filler materials proposed for use in the sputter fabrication regeneratively cooled thrust chambers were evaluated. Low melting castable alloys, CERROBEND. CERROCAST, and CERROTRU, slurry applied SERMETEL 481 and flame-sprayed aluminum were investigated as filler materials. Sputter deposition from a cylindrical cathode inverted magnestron was used to apply an OFHC copper closeout layer to filled OFHC copper ribbed-wall cylindrical substrates. The sputtered closeout layer structure was evaluated with respect to filler material contamination, predeposition machining and finishing operations, and deposition parameters. The application of aluminum by flame-spraying resulted in excessiver filler porosity. Though the outgassing from this porosity was found to be detrimental to the closeout layer structure, bond strengths in excess of 10,500 psi were achieved. Removal of the aluminum from the grooves was readily accomplished by leaching in a 7.0 molar solution of sodium hydroxide at 353 K. Of the other filler materials evaluated, CERROTRU was found to be the most suitable material with respect to completely filling the ribbed-wall cylinders and vacuum system compatibility. However, bond contamination resulted in low closeout layer bond strength with the CERROTRU filler. CERROBEND, CERROCAST, and SERMETEL 481 were found to be unacceptable as filler materials. |
| NASA分類 | MACHINE ELEMENTS AND PROCESSES |
| レポートNO | 74N28959
NASA-CR-134629
FR-6353-VOL-1 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/193820 |
|
