| タイトル | Evaluation of Stress Corrosion Cracking Susceptibility Using Fracture Mechanics Techniques, Part 1 |
| 本文（外部サイト） | http://hdl.handle.net/2060/19740002722 |
| 著者（英） | Shumaker, M. B.; Coursen, J. W.; Sprowls, D. O.; Walsh, J. D. |
| 著者所属（英） | Aluminum Co. of America |
| 発行日 | 1973-05-31 |
| 言語 | eng |
| 内容記述 | Stress corrosion cracking (SSC) tests were performed on 13 aluminum alloys, 13 precipitation hardening stainless steels, and two titanium 6Al-4V alloy forgings to compare fracture mechanics techniques with the conventional smooth specimen procedures. Commercially fabricated plate and rolled or forged bars 2 to 2.5-in. thick were tested. Exposures were conducted outdoors in a seacoast atmosphere and in an inland industrial atmosphere to relate the accelerated tests with service type environments. With the fracture mechanics technique tests were made chiefly on bolt loaded fatigue precracked compact tension specimens of the type used for plane-strain fracture toughness tests. Additional tests of the aluminum alloy were performed on ring loaded compact tension specimens and on bolt loaded double cantilever beams. For the smooth specimen procedure 0.125-in. dia. tensile specimens were loaded axially in constant deformation type frames. For both aluminum and steel alloys comparative SCC growth rates obtained from tests of precracked specimens provide an additional useful characterization of the SCC behavior of an alloy. |
| NASA分類 | STRUCTURAL MECHANICS |
| レポートNO | 74N10835
NASA-CR-124469 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/196912 |
|
