| タイトル | Irradiation of three T-111 clad uranium nitride fuel pins for 8070 hours at 990 C (1815 F) |
| 本文（外部サイト） | http://hdl.handle.net/2060/19730022882 |
| 著者（英） | Gedeon, L.; Siegel, B. L.; Galbo, R. J.; Slaby, J. G. |
| 著者所属（英） | NASA Lewis Research Center |
| 発行日 | 1973-10-01 |
| 言語 | eng |
| 内容記述 | The design and successful operation of three tantalum alloy (Ta-8W-2Hf) clad uranium mononitride (UN) fuel pins irradiated for 8070 hr at 990 C (1815 F) is described. Two pin diameters having measured burnups of 0.47 and 0.90 uranium atom percent were tested. No clad failures or swelling was detected; however, postirradiation clad samples tested failed with 1 percent strain. The fuel density decrease was 2 percent, and the fission gas release was less than 0.05 percent. Isotropic fuel swelling, which averaged about 0.5 percent, was less than fuel pin assembly clearances. Thus the clad was not strained. Thermocouples with a modified hot zone operated at average temperatures to 1100 C (2012 F) without failure. Factors that influence the ability to maintain uniform clad temperature as well as the results of the heat transfer calculations are discussed. |
| NASA分類 | NUCLEAR ENGINEERING |
| レポートNO | 73N31614
NASA-TM-X-2878
E-7474 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/197686 |
