| タイトル | Development of advanced high strength tantalum base alloys. Phase 3: Influence of metallurgical condition on the mechanical properties of ASTAR-811C sheet |
| 本文（外部サイト） | http://hdl.handle.net/2060/19730008898 |
| 著者（英） | Harrod, D. L.; Buckman, R. W., Jr.; Ammon, R. L. |
| 著者所属（英） | Westinghouse Electric Corp. |
| 発行日 | 1972-12-01 |
| 言語 | eng |
| 内容記述 | Metallurgical condition was shown to have a significant effect on the creep properties of ASTAR-811C (Ta-8W-1Re-0.7Hf-0.025C) sheet. Cold worked material exhibited creep rates 30 times higher than solution annealed material and 10 times greater than for recrystallized material. Both grain size and the carbide morphology changes as the final annealing temperature was raised from 3000 F to 3600 F. However, the lowest creep rates were achieved for material which retained the high temperature form of the Ta2C precipitate. Samples with GTA weldments had essentially identical properties as recrystallized base metal. Cooling rates from 3600 F of 5, 50, and 800 F deg/min. had little effect on the 2000 and 2400 F creep behavior of ASTAR-811C. |
| NASA分類 | MATERIALS, METALLIC |
| レポートNO | 73N17625
WANL-M-FR-72-009
NASA-CR-121096 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/200590 |
