タイトル | Investigation of a mixed compression axisymmetric inlet at Mach number 5.3 |
本文(外部サイト) | http://hdl.handle.net/2060/19720007338 |
著者(英) | Latham, E. A.; Smeltzer, D. B.; Sorenson, N. E. |
著者所属(英) | NASA Ames Research Center |
発行日 | 1972-01-01 |
言語 | eng |
内容記述 | The hypersonic diffuser portion of an uncooled high performance mixed compression, axisymmetric inlet suitable for subsonic burning engines was designed and tested. Performance of a model with a 25.4-cm capture diameter was measured in a wind tunnel and the results were compared with theoretical predictions calculated by a comprehensive computer program. All tests were conducted at a Mach number of 5.3 at a total temperature of 667 K and a total pressure of 11.57 atm. The angle of attack ranged from 0 to + or - 3 deg. Performance at angle of attack remained high. Reasonably high performance in the throat (maximum throat pitot-pressure recovery of 77 percent and an average value of 58 percent) was obtained at 0 deg angle of attack with relatively large amounts of boundary-layer bleed (11 to 22 percent of the capture mass flow). The computer program used in the design of this inlet is considered marginally adequate for predicting hypersonic inlet flow fields. Although the program as it now exists is very useful, an improved computer program that more accurately predicts the boundary layer and the shock-wave-boundary-layer interaction and accounts for boundary-layer bleed should be developed for reliability predicting hypersonic inlet flow fields. |
NASA分類 | AERODYNAMICS |
レポートNO | 72N14988 NASA-TN-D-6647 A-4160 |
権利 | No Copyright |
URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/204331 |