| タイトル | Trailing Edge Blowing on a Two-Dimensional Six-Percent Thick Elliptical Circulation Control Airfoil Up to Transonic Conditions |
| 本文（外部サイト） | http://hdl.handle.net/2060/20050165090 |
| 著者（英） | Keller, Donald F.; Alexander, Michael G.; Anders, Scott G.; Florance, Jennifer P.; Johnson, Stuart K. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2005-03-01 |
| 言語 | eng |
| 内容記述 | A wind tunnel test was conducted in the NASA Langley Transonic Dynamics Tunnel (TDT) on a six percent thick slightly cambered elliptical circulation control airfoil with both upper and lower surface blowing capability. Parametric evaluations of jet slot heights and Coanda surface shapes were conducted at momentum coefficients (Cm) from 0.0 to 0.12. Test data were acquired at Mach numbers of 0.3, 0.5, 0.7, 0.8, and 0.84 at Reynolds numbers per foot of 2.43 x 105 to 1.05 x 106. For a transonic condition, (Mach = 0.8 at alpha = 3 degrees), it was generally found the smaller slot and larger Coanda surface combination was overall more effective than other slot/Coanda surface combinations. Lower surface blowing was not as effective as the upper surface blowing over the same range of momentum coefficients. No appreciable Coanda surface, slot height, or slot blowing position preference was indicated transonically with the dual slot blowing. |
| NASA分類 | Aerodynamics |
| レポートNO | NASA/TM-2005-213545
L-19058 |
| 権利 | No Copyright |
|
