| タイトル | Hoop Tensile Characterization Of SiC/SiC Cylinders Fabricated From 2D Fabric |
| 本文（外部サイト） | http://hdl.handle.net/2060/20030020817 |
| 著者（英） | Barnett, Terry R.; Yun, HeeMann; Verrilli, Michael J.; DiCarlo, James A. |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2002-11-26 |
| 言語 | eng |
| 内容記述 | Tensile stress-strain properties in the hoop direction were obtained for 100-mm diameter SiC/SiC cylinders using ring specimens machined from the cylinder ends. The cylinders were fabricated from 2D balanced fabric with several material variants, including wall thickness (6, 8, and 12 plies), Sic fiber type (Sylramic, Sylramic-iBN, Hi-Nicalon, and Hi-Nicalon S), fiber sizing type, and matrix type (full CVI Sic, and partial CVI plus melt-infiltrated SiC-Si). Fiber ply splices existed in the all the hoops. Tensile hoop measurements were made at room temperature and 1200 C using hydrostatic ring test facilities. The hoop results are compared with in-plane data measured on flat panels using same material variants, but containing no splices. |
| NASA分類 | Composite Materials |
| 権利 | Copyright, Distribution as joint owner in the copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/223615 |
|
