| タイトル | Effect of Growth Rate on Elevated Temperature Plastic Flow and Room Temperature Fracture Toughness of Directionally Solidified NiAl-31Cr-3Mo |
| 本文（外部サイト） | http://hdl.handle.net/2060/20000004899 |
| 著者（英） | Whittenberger, J. Daniel; Salem, J. A.; Locci, I. E.; Raj, S. V. |
| 著者所属（英） | NASA Lewis Research Center |
| 発行日 | 1999-02-16 |
| 言語 | eng |
| 内容記述 | The eutectic system Ni-33Al-31Cr-3Mo was directionally solidified at rates ranging from 7.6 to 508 mm/h. Samples were examined for microstructure and alloy chemistry, compression tested at 1200 and 1300 K, and subjected to room temperature fracture toughness measurements. Lamellar eutectic grains were formed at 12.7 mm/h; however cellular structures with a radial eutectic pattern developed at faster growth rates. Elevated temperature compression testing between 10(exp -4) to 10(exp -7)/s did not reveal an optimum growth condition, nor did any single growth condition result in a significant fracture toughness advantage. The mechanical behavior, taken together, suggests that Ni-33Al-31Cr-3Mo grown at rates from 25.4 to 254 mm/h will have nominally equivalent properties. |
| NASA分類 | Solid-State Physics |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/227531 |
|
