| タイトル | Development of Non-Optimum Factors for Launch Vehicle Propellant Tank Bulkhead Weight Estimation |
| 本文（外部サイト） | http://hdl.handle.net/2060/20130002605 |
| 著者（英） | Cerro, Jeffrey A.; Wallace, Matthew L.; Wu, K. Chauncey |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2012-09-28 |
| 言語 | eng |
| 内容記述 | Non-optimum factors are used during aerospace conceptual and preliminary design to account for the increased weights of as-built structures due to future manufacturing and design details. Use of higher-fidelity non-optimum factors in these early stages of vehicle design can result in more accurate predictions of a concept s actual weights and performance. To help achieve this objective, non-optimum factors are calculated for the aluminum-alloy gores that compose the ogive and ellipsoidal bulkheads of the Space Shuttle Super-Lightweight Tank propellant tanks. Minimum values for actual gore skin thicknesses and weld land dimensions are extracted from selected production drawings, and are used to predict reference gore weights. These actual skin thicknesses are also compared to skin thicknesses predicted using classical structural mechanics and tank proof-test pressures. Both coarse and refined weights models are developed for the gores. The coarse model is based on the proof pressure-sized skin thicknesses, and the refined model uses the actual gore skin thicknesses and design detail dimensions. To determine the gore non-optimum factors, these reference weights are then compared to flight hardware weights reported in a mass properties database. When manufacturing tolerance weight estimates are taken into account, the gore non-optimum factors computed using the coarse weights model range from 1.28 to 2.76, with an average non-optimum factor of 1.90. Application of the refined weights model yields non-optimum factors between 1.00 and 1.50, with an average non-optimum factor of 1.14. To demonstrate their use, these calculated non-optimum factors are used to predict heavier, more realistic gore weights for a proposed heavy-lift launch vehicle s propellant tank bulkheads. These results indicate that relatively simple models can be developed to better estimate the actual weights of large structures for future launch vehicles. |
| NASA分類 | Spacecraft Design, Testing and Performance |
| レポートNO | NF1676L-14443
AIAA Paper 2013-0814 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
|
