| タイトル | Processing Issues for Preliminary Melts of the Intermetallic Compound 60-NITINOL |
| 本文（外部サイト） | http://hdl.handle.net/2060/20130000580 |
| 著者（英） | Thomas, Fransua; DellaCorte, Christopher; Stanford, Malcolm K. |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2012-11-01 |
| 言語 | eng |
| 内容記述 | The effect of various high temperature heat treatments and cooling rates on the hardness of cast 60-NITINOL (60wt%Ni- 40wt%Ti) was studied. The hardness ranged from approximately 33 HRC for annealed specimens to 63 HRC for water quenched specimens. Aging did not have a further effect on the hardness of the heat-treated and quenched material. The issue of material contamination and its possible effect on quench cracking during heat treatment above 1000 C was explored. The Charpy impact energy of the material was found to be relatively low (ranging from 0.4 to 1.0 J) and comparable to that of cast magnesium. Selection of service environments and applications for this material based on these findings should consider the processing route by which it was produced. |
| NASA分類 | Metals and Metallic Materials |
| レポートNO | E-18479
GRC-E-DAA-TN4035
NASA/TM-2012-216044 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/239664 |
