| タイトル | Study of Velocity and Materials on Tribocharging of Polymer Powders for Powder Coating Applications |
| 本文（外部サイト） | http://hdl.handle.net/2060/20120001362 |
| 著者（英） | Mazumder, Malay K.; Trigwell, Steve; Sims, Robert A.; Biris, Alex S. |
| 著者所属（英） | NASA Kennedy Space Center |
| 発行日 | 2005-06-21 |
| 言語 | eng |
| 内容記述 | Electrostatic powder deposition is widely used in a plethora of industrial-applications ranging from the pharmaceutical and food.industries, to farm equipment and automotive applications. The disadvantages of this technique are possible back corona (pin-like formations) onset and the Faraday penetration limitation (when the powder does not penetrate in some recessed areas). A possible solution to overcome these problems is to use tribochargers to electrostatically charge the powder. Tribocharging, or contact charging while two materials are in contact, is related to the work function difference between the contacting materials and generates bipolarly charged particles. The generation of an ion-free powder cloud by tribocharging with high bipolar charge and an overall charge density of almost zero, provides a better coverage of the recessed areas. In this study, acrylic and epoxy powders were fluidized and charged by passing through stainless steel, copper, aluminum, and polycarbonate static mixers, respectively. The particle velocity was varied to determine its effect on the net charge-to-mass ratio (QIM) acquired by the powders. In general, the Q/M increases rapidly when the velocity was increased from 1.5 to 2.5 m/s, remaining almost constant for higher velocities. Charge separation experiments showed bipolar charging for all chargers. |
| NASA分類 | Electronics and Electrical Engineering |
| レポートNO | KSC-2005-054 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
|
