| タイトル | Adaptive Aft Signature Shaping of a Low-Boom Supersonic Aircraft Using Off-Body Pressures |
| 本文（外部サイト） | http://hdl.handle.net/2060/20120000927 |
| 著者（英） | Ordaz, Irian; Li, Wu |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2012-01-09 |
| 言語 | eng |
| 内容記述 | The design and optimization of a low-boom supersonic aircraft using the state-of-the- art o -body aerodynamics and sonic boom analysis has long been a challenging problem. The focus of this paper is to demonstrate an e ective geometry parameterization scheme and a numerical optimization approach for the aft shaping of a low-boom supersonic aircraft using o -body pressure calculations. A gradient-based numerical optimization algorithm that models the objective and constraints as response surface equations is used to drive the aft ground signature toward a ramp shape. The design objective is the minimization of the variation between the ground signature and the target signature subject to several geometric and signature constraints. The target signature is computed by using a least-squares regression of the aft portion of the ground signature. The parameterization and the deformation of the geometry is performed with a NASA in- house shaping tool. The optimization algorithm uses the shaping tool to drive the geometric deformation of a horizontal tail with a parameterization scheme that consists of seven camber design variables and an additional design variable that describes the spanwise location of the midspan section. The demonstration cases show that numerical optimization using the state-of-the-art o -body aerodynamic calculations is not only feasible and repeatable but also allows the exploration of complex design spaces for which a knowledge-based design method becomes less effective. |
| NASA分類 | Aerodynamics |
| レポートNO | NF1676L-12815
AIAA Paper 2012-0020 |
| 権利 | No Copyright |
