| タイトル | Gear Mesh Loss-of-Lubrication Experiments and Analytical Simulation |
| 本文（外部サイト） | http://hdl.handle.net/2060/20120000057 |
| 著者（英） | Morales, Wilfredo; Polly, Joseph; Handschuh, Robert F. |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2011-11-01 |
| 言語 | eng |
| 内容記述 | An experimental program to determine the loss-of-lubrication (LOL) characteristics of spur gears in an aerospace simulation test facility has been completed. Tests were conducted using two different emergency lubricant types: (1) an oil mist system (two different misted lubricants) and (2) a grease injection system (two different grease types). Tests were conducted using a NASA Glenn test facility normally used for conducting contact fatigue. Tests were run at rotational speeds up to 10000 rpm using two different gear designs and two different gear materials. For the tests conducted using an air-oil misting system, a minimum lubricant injection rate was determined to permit the gear mesh to operate without failure for at least 1 hr. The tests allowed an elevated steady state temperature to be established. A basic 2-D heat transfer simulation has been developed to investigate temperatures of a simulated gear as a function of frictional behavior. The friction (heat generation source) between the meshing surfaces is related to the position in the meshing cycle, the load applied, and the amount of lubricant in the contact. Experimental conditions will be compared to those from the 2-D simulation. |
| NASA分類 | Mechanical Engineering |
| レポートNO | NASA/TM-2011-217106
E-17681-1 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/244438 |
