タイトル | Flow Simulation of Supersonic Inlet with Bypass Annular Duct |
本文(外部サイト) | http://hdl.handle.net/2060/20110011992 |
著者(英) | Kim, HyoungJin; Conners, Timothy R.; Povinelli, Louis A.; Liou, Meng-Sing; Kumano, Takayasu |
著者所属(英) | NASA Glenn Research Center |
発行日 | 2011-01-01 2011 |
言語 | eng |
内容記述 | A relaxed isentropic compression supersonic inlet is a new concept that produces smaller cowl drag than a conventional inlet, but incurs lower total pressure recovery and increased flow distortion in the (radially) outer flowpath. A supersonic inlet comprising a bypass annulus to the relaxed isentropic compression inlet dumps out airflow of low quality through the bypass duct. A reliable computational fluid dynamics solution can provide considerable useful information to ascertain quantitatively relative merits of the concept, and further provide a basis for optimizing the design. For a fast and reliable performance evaluation of the inlet performance, an equivalent axisymmetric model whose area changes accounts for geometric and physical (blockage) effects resulting from the original complex three-dimensional configuration is proposed. In addition, full three-dimensional calculations are conducted for studying flow phenomena and verifying the validity of the equivalent model. The inlet-engine coupling is carried out by embedding numerical propulsion system simulation engine data into the flow solver for interactive boundary conditions at the engine fan face and exhaust plane. It was found that the blockage resulting from complex three-dimensional geometries in the bypass duct causes significant degradation of inlet performance by pushing the terminal normal shock upstream. |
NASA分類 | Aerodynamics |
レポートNO | E-17643 |
権利 | Copyright, Distribution as joint owner in the copyright |
URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/247000 |