| タイトル | Material Studies Related to the Use of NaK Heat Exchangers Coupled to Stirling Heater Heads |
| 本文（外部サイト） | http://hdl.handle.net/2060/20110011519 |
| 著者（英） | Geng, Steven M.; Robbie, Malcolm G.; Bowman, Cheryl L.; Locci, Ivan E. |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2011-04-01 |
| 言語 | eng |
| 内容記述 | NASA has been supporting design studies and technology development that could provide power to an outpost on the Moon, Mars, or an asteroid. Technology development efforts have included fabrication and evaluation of components used in a Stirling engine power conversion system. Destructive material evaluation was performed on a NaK shell heat exchanger that was developed by the NASA Glenn Research Center (GRC) and integrated with a commercial 1 kWe Stirling convertor from Sunpower Incorporated. The NaK Stirling test demonstrated Stirling convertor electrical power generation using a pumped liquid metal heat source under thermal conditions that represent the heat exchanger liquid metal loop in a Fission Power Systems (FPS) reactor. The convertors were operated for a total test time of 66 hr at a maximum temperature of 823 K. After the test was completed and NaK removed, the heat exchanger assembly was sectioned to evaluate any material interactions with the flowing liquid metal. Several dissimilar-metal braze joint options, crucial for the heat exchanger transfer path, were also investigated. A comprehensive investigation was completed and lessons learned for future heat exchanger development efforts are discussed. |
| NASA分類 | Metals and Metallic Materials |
| レポートNO | NASA/TM-2011-217001
E-17661
NETS-2011-3389 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/247194 |
