| タイトル | Effect of Thermomechanical Processing on the Microstructure, Properties, and Work Behavior of a Ti50.5 Ni29.5 Pt20 High-Temperature Shape Memory Alloy |
| 本文（外部サイト） | http://hdl.handle.net/2060/20110001639 |
| 著者（英） | Draper, Susan; Padula, Santo, II; Brown, Jeff; Begelow, Glen; Garga, Anita; Noebe, Ronald; Penney, Nicholas; Gaydosh, Darrell; Lerch, Brad |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2006-05-07 |
| 言語 | eng |
| 内容記述 | TiNiPt shape memory alloys are particularly promising for use as solid state actuators in environments up to 300 C, due to a reasonable balance of properties, including acceptable work output. However, one of the challenges to commercializing a viable high-temperature shape memory alloy (HTSMA) is to establish the appropriate primary and secondary processing techniques for fabrication of the material in a required product form such as rod and wire. Consequently, a Ti(50.5)Ni(29.5)Pt20 alloy was processed using several techniques including single-pass high-temperature extrusion, multiple-pass high-temperature extrusion, and cold drawing to produce bar stock, thin rod, and fine wire, respectively. The effects of heat treatment on the hardness, grain size, room temperature tensile properties, and transformation temperatures of hot- and cold-worked material were examined. Basic tensile properties as a function of temperature and the strain-temperature response of the alloy under constant load, for the determination of work output, were also investigated for various forms of the Ti(50.5)Ni(29.5)Pt20 alloy, including fine wire. |
| NASA分類 | Metals and Metallic Materials |
| レポートNO | ASM Paper 12688
E-15746 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/249176 |
|
