| タイトル | Impedance Eduction in Ducts with Higher-Order Modes and Flow |
| 本文（外部サイト） | http://hdl.handle.net/2060/20090020452 |
| 著者（英） | Jones, Michael G.; Watson, Willie R. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2009-05-11 |
| 言語 | eng |
| 内容記述 | An impedance eduction technique, previously validated for ducts with plane waves at the source and duct termination planes, has been extended to support higher-order modes at these locations. Inputs for this method are the acoustic pressures along the source and duct termination planes, and along a microphone array located in a wall either adjacent or opposite to the test liner. A second impedance eduction technique is then presented that eliminates the need for the microphone array. The integrity of both methods is tested using three sound sources, six Mach numbers, and six selected frequencies. Results are presented for both a hardwall and a test liner (with known impedance) consisting of a perforated plate bonded to a honeycomb core. The primary conclusion of the study is that the second method performs well in the presence of higher-order modes and flow. However, the first method performs poorly when most of the microphones are located near acoustic pressure nulls. The negative effects of the acoustic pressure nulls can be mitigated by a judicious choice of the mode structure in the sound source. The paper closes by using the first impedance eduction method to design a rectangular array of 32 microphones for accurate impedance eduction in the NASA LaRC Curved Duct Test Rig in the presence of expected measurement uncertainties, higher order modes, and mean flow. |
| NASA分類 | Acoustics |
| レポートNO | LF99-7999 |
| 権利 | No Copyright |
|
