| タイトル | Thermal Analysis and Testing of Candidate Materials for PAIDAE Inflatable Aeroshell |
| 本文（外部サイト） | http://hdl.handle.net/2060/20090019746 |
| 著者（英） | Bruce, Walter E., III; Liles, Kaitlin A.; Hughes, Stephen J.; DelCorso, Joseph A. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2009-05-04 |
| 言語 | eng |
| 内容記述 | The Program to Advance Inflatable-Decelerators for Atmospheric Entry (PAIDAE) is a NASA project tasked with developing and evaluating viable inflatable-decelerator aeroshell geometries and materials. Thermal analysis of material layups supporting an inflatable aeroshell was completed in order to identify expected material response, failure times, and to establish an experimental test matrix to keep barrier layer materials from reaching critical temperature limits during thermal soak. Material layups were then tested in the 8- foot High Temperature Tunnel (8'HTT), where they were subjected to hypersonic aerothermal heating conditions, similar to those expected for a Mars entry. This paper presents a broad overview of the thermal analysis supporting multiple materials, and layup configurations tested in the 8'HTT at flight conditions similar to those that would be experienced during Mars entry trajectories. Direct comparison of TPS samples tested in the 8'HTT verify that the thermal model accurately predicted temperature profiles when there are up to four materials in the test layup. As the number of material layers in each test layup increase (greater than 4), the accuracy of the prediction decreases significantly. The inaccuracy of the model predictions for layups with more than four material layers is believed to be a result of the contact resistance values used throughout the model being inaccurate. In addition, the harsh environment of the 8'HTT, including hot gas penetrating through the material layers, could also be a contributing factor. |
| NASA分類 | Fluid Mechanics and Thermodynamics |
| レポートNO | LF99-8353 |
| 権利 | No Copyright |
|
