| タイトル | Ceramics for Molten Materials Containment, Transfer and Handling on the Lunar Surface |
| 本文（外部サイト） | http://hdl.handle.net/2060/20090017899 |
| 著者（英） | Stefanescu, Doru M.; Curreri, Peter A.; Standish, Evan |
| 著者所属（英） | NASA Marshall Space Flight Center |
| 発行日 | 2009-01-05 |
| 言語 | eng |
| 内容記述 | As part of a project on Molten Materials Transfer and Handling on the Lunar Surface, molten materials containment samples of various ceramics were tested to determine their performance in contact with a melt of lunar regolith simulant. The test temperature was 1600 C with contact times ranging from 0 to 12 hours. Regolith simulant was pressed into cylinders with the approximate dimensions of 1.25 dia x 1.25cm height and then melted on ceramic substrates. The regolith-ceramic interface was examined after processing to determine the melt/ceramic interaction. It was found that the molten regolith wetted all oxide ceramics tested extremely well which resulted in chemical reaction between the materials in each case. Alumina substrates were identified which withstood contact at the operating temperature of a molten regolith electrolysis cell (1600 C) for eight hours with little interaction or deformation. This represents an improvement over alumina grades currently in use and will provide a lifetime adequate for electrolysis experiments lasting 24 hours or more. Two types of non-oxide ceramics were also tested. It was found that they interacted to a limited degree with the melt resulting in little corrosion. These ceramics, Sic and BN, were not wetted as well as the oxides by the melt, and so remain possible materials for molten regolith handling. Tests wing longer holding periods and larger volumes of regolith are necessary to determine the ultimate performance of the tested ceramics. |
| NASA分類 | Geophysics |
| レポートNO | MSFC-2207 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
|
