| タイトル | Aerothermodynamic Testing and Boundary Layer Trip Sizing of the HIFiRE Flight 1 Vehicle |
| 本文（外部サイト） | http://hdl.handle.net/2060/20090004557 |
| 著者（英） | Johnson, Heath; Greene, Frank A.; Kimmel, Roger; Alba, Christopher; Berger, Karen T. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2008-01-01 |
| 言語 | eng |
| 内容記述 | An experimental wind tunnel test was conducted in the NASA Langley Research Center s 20-Inch Mach 6 Air Tunnel in support of the Hypersonic International Flight Research Experimentation Program. The information in this article is focused on the Flight 1 configuration, the first in a series of flight experiments. The article documents experimental measurements made over a Reynolds numbers range of 2.1x10(exp 6)/ft to 5.6x10(exp 6)/ft and angles of attack of -5 to +5 deg on several scaled ceramic heat transfer models of the Flight 1 configuration. Global heat transfer was measured using phosphor thermography and the resulting images and heat transfer distributions were used to infer the state of the boundary layer on the vehicle windside and leeside surfaces. Boundary layer trips were used to force the boundary layer turbulent and the experimental data highlighted in this article were used to size and place the boundary layer trip for the flight vehicle. The required height of the flight boundary layer trip was determined to be 0.079 in and the trip was moved from the design location of 7.87 in to 20.47 in to ensure that augmented heating would not impact the laminar side of the vehicle. Allowable roughness was selected to be 3.2x10(exp -3) in. |
| NASA分類 | Aerodynamics |
| 権利 | Copyright, Distribution as joint owner in the copyright |
