| タイトル | A Numerical Study of Anti-Vortex Film Cooling Designs at High Blowing Ratio |
| 本文（外部サイト） | http://hdl.handle.net/2060/20080047695 |
| 著者（英） | Heidmann, James D. |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2008-11-01 |
| 言語 | eng |
| 内容記述 | A concept for mitigating the adverse effects of jet vorticity and liftoff at high blowing ratios for turbine film cooling flows has been developed and studied at NASA Glenn Research Center. This "anti-vortex" film cooling concept proposes the addition of two branched holes from each primary hole in order to produce a vorticity counter to the detrimental kidney vortices from the main jet. These vortices typically entrain hot freestream gas and are associated with jet separation from the turbine blade surface. The anti-vortex design is unique in that it requires only easily machinable round holes, unlike shaped film cooling holes and other advanced concepts. The anti-vortex film cooling hole concept has been modeled computationally for a single row of 30deg angled holes on a flat surface using the 3D Navier-Stokes solver Glenn-HT. A modification of the anti-vortex concept whereby the branched holes exit adjacent to the main hole has been studied computationally for blowing ratios of 1.0 and 2.0 and at density ratios of 1.0 and 2.0. This modified concept was selected because it has shown the most promise in recent experimental studies. The computational results show that the modified design improves the film cooling effectiveness relative to the round hole baseline and previous anti-vortex cases, in confirmation of the experimental studies. |
| NASA分類 | Aircraft Propulsion and Power |
| レポートNO | NASA/TM-2008-215209
E-16482
GT2008-50845 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/254680 |
