| タイトル | Investigation of Selectively-Reinforced Metallic Lugs |
| 本文（外部サイト） | http://hdl.handle.net/2060/20070031770 |
| 著者（英） | Abada, Christopher H.; Farley, Gary L. |
| 著者所属（英） | Army Research Lab. |
| 発行日 | 2007-08-01 |
| 言語 | eng |
| 内容記述 | An investigation of the effects of material and geometric variables on the response of U-shaped band-reinforced metallic lugs was performed. Variables studied were reinforcement, adhesive and metallic lug mechanical properties, hole diameter, reinforcement and adhesive thickness, and the distance from the hole s center to the end of the lug. Generally, U-shaped band reinforced lugs exhibited superior performance than non-reinforced lugs, that is higher load at the conventional lug design criteria of four percent hole elongation. Depending upon the reinforcement configuration the increase in load may be negligible to 15 or 20 percent. U-shaped band reinforcement increases lug load carrying capability primarily through two mechanisms; increasing the slope of the response curve after the initial knee and restraining overall deformation of the metallic portion of the lug facilitating increased yielding of metallic material between the hole and the edge of the metallic portion of the lug. |
| NASA分類 | Metals and Metallic Materials |
| レポートNO | NASA/TM-2007-214896
L-19372
ARL-TR-4137 |
| 権利 | No Copyright |
|
