| タイトル | Micro-Textured Black Silicon Wick for Silicon Heat Pipe Array |
| 本文（外部サイト） | http://hdl.handle.net/2060/20130011224 |
| 著者（英） | Sunada, Eric T.; Ganapathi, Gani B.; Yee, Karl Y.; Manohara, Harish; Prina, Mauro; Homyk, Andrew |
| 著者所属（英） | California Inst. of Tech. |
| 発行日 | 2013-03-01 |
| 言語 | eng |
| 内容記述 | Planar, semiconductor heat arrays have been previously proposed and developed; however, this design makes use of a novel, microscale black silicon wick structure that provides increased capillary pumping pressure of the internal working fluid, resulting in increased effective thermal conductivity of the device, and also enables operation of the device in any orientation with respect to the gravity vector. In a heat pipe, the efficiency of thermal transfer from the case to the working fluid is directly proportional to the surface area of the wick in contact with the fluid. Also, the primary failure mechanism for heat pipes operating within the temperature range of interest is inadequate capillary pressure for the return of fluid from the condenser to the wick. This is also what makes the operation of heat pipes orientation-sensitive. Thus, the two primary requirements for a good wick design are a large surface area and high capillary pressure. Surface area can be maximized through nanomachined surface roughening. Capillary pressure is largely driven by the working fluid and wick structure. The proposed nanostructure wick has characteristic dimensions on the order of tens of microns, which promotes menisci of very small radii. This results in the possibility of enormous pumping potential due to the inverse proportionality with radius. Wetting, which also enhances capillary pumping, can be maximized through growth of an oxide layer or material deposition (e.g. TiO2) to create a superhydrophilic surface. |
| NASA分類 | Fluid Mechanics and Thermodynamics |
| レポートNO | NPO-47299 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
|
