| タイトル | Coupled 2D-3D finite element method for analysis of a skin panel with a discontinuous stiffener |
| 著者（英） | Lotts, C. G.; Davis, D. D., Jr.; Wang, J. T.; Krishnamurthy, T. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 1992-01-01 |
| 言語 | eng |
| 内容記述 | This paper describes a computationally efficient analysis method which was used to predict detailed stress states in a typical composite compression panel with a discontinuous hat stiffener. A global-local approach was used. The global model incorporated both 2D shell and 3D brick elements connected by newly developed transition elements. Most of the panel was modeled with 2D elements, while 3D elements were employed to model the stiffener flange and the adjacent skin. Both linear and geometrically nonlinear analyses were performed on the global model. The effect of geometric nonlinearity induced by the eccentric load path due to the discontinuous hat stiffener was significant. The local model used a fine mesh of 3D brick elements to model the region at the end of the stiffener. Boundary conditions of the local 3D model were obtained by spline interpolation of the nodal displacements from the global analysis. Detailed in-plane and through-the-thickness stresses were calculated in the flange-skin interface near the end of the stiffener. |
| NASA分類 | STRUCTURAL MECHANICS |
| レポートNO | 92A34363
AIAA PAPER 92-2474 |
| 権利 | Copyright |
|
