| タイトル | ARC and Melting Efficiency of Plasma ARC Welds |
| 著者（英） | McClure, J. C.; Nunes, A. C.; Evans, D. M. |
| 著者所属（英） | NASA Marshall Space Flight Center |
| 発行日 | 1999-01-01 |
| 言語 | eng |
| 内容記述 | A series of partial penetration Variable Polarity Plasma Arc welds were made at equal power but various combinations of current and voltage on 2219 Aluminum. Arc efficiency was measured calorimetrically and ranged between 48% and 66% for the conditions of the welds. Arc efficiency depends in different ways on voltage and current. The voltage effect dominates. Raising voltage while reducing current increases arc efficiency. Longer, higher voltage arcs are thought to transfer a greater portion of arc power to the workpiece through shield gas convection. Melting efficiency depends upon weld pool shape as well as arc efficiency. Increased current increases the melting efficiency as it increases the depth to width ratio of the weld pool. Increased plasma gas flow does the same thing. Higher currents are thought to raise arc pressure and depress liquid at the bottom of the weld pool. More arc power then transfers to the workpiece through increasing plasma gas convection. If the power is held constant, the reduced voltage lowers the arc efficiency, while the pool shape change increases the melting efficiency, |
| NASA分類 | Mechanical Engineering |
| 権利 | No Copyright |
|
