| タイトル | Design of an Improved Heater Array to Measure Microscale Wall Heat Transfer |
| 本文（外部サイト） | http://hdl.handle.net/2060/19970000385 |
| 著者（英） | Kalkur, T. S.; Chng, Choon Ping; Kim, Jungho |
| 著者所属（英） | Denver Univ. |
| 発行日 | 1996-09-01 |
| 言語 | eng |
| 内容記述 | An improved array of microscale heaters is being developed to measure the heat transfer coefficient at many points underneath individual bubbles during boiling as a function of space and time. This heater array enables the local heat transfer from a surface during the bubble growth and departure process to be measured with very high temporal and spatial resolution, and should allow better understanding of the boiling heat transfer mechanisms by pin-pointing when and where in the bubble departure cycle large amounts of wall heat transfer occur. Such information can provide much needed data regarding the important heat transfer mechanisms during the bubble departure cycle, and can serve as benchmarks to validate many of the analytical and numerical models used to simulate boiling. The improvements to the heater array include using a silicon-on-quartz substrate to reduce thermal cross-talk between the heaters, decreased space between the heaters, increased pad sizes on the heaters, and progressive heater sizes. Some results using the present heater array are discussed. |
| NASA分類 | Fluid Mechanics and Heat Transfer |
| レポートNO | 97N10352 |
| 権利 | No Copyright |
|
