| タイトル | Propulsion System Development for the Iodine Satellite (iSAT) Demonstration Mission |
| 本文（外部サイト） | http://hdl.handle.net/2060/20150016536 |
| 著者（英） | Szabo, James; Lee, Lauren; Hickman, Tyler A.; Kamhawi, Hani; Seixal, Joao F.; Jerman, Gregory A.; Pote, Bruce; Mauro, Stephanie L.; Dankanich, John; Calvert, Derek H.; Peeples, Stephen R.; Lewis, Brandon L.; Polzin, Kurt A. |
| 著者所属（英） | NASA Marshall Space Flight Center |
| 発行日 | 2015-07-06 |
| 言語 | eng |
| 内容記述 | The development and testing of a 200-W iodine-fed Hall thruster propulsion system that will be flown on a 12-U CubeSat is described. The switch in propellant from more traditional xenon gas to solid iodine yields the advantage of high density, low pressure propellant storage but introduces new requirements that must be addressed in the design and operation of the propulsion system. The thruster materials have been modified from a previously-flown xenon Hall thruster to make it compatible with iodine vapor. The cathode incorporated into this design additionally requires little or no heating to initiate the discharge, reducing the power needed to start the thruster. The feed system produces iodine vapor in the propellant reservoir through sublimation and then controls the flow to the anode and cathode of the thruster using a pair of proportional flow control valves. The propellant feeding process is controlled by the power processing unit, with feedback control on the anode flow rate provided through a measure of the thruster discharge current. Thermal modeling indicates that it may be difficult to sufficiently heat the iodine if it loses contact with the propellant reservoir walls, serving to motivate future testing of that scenario to verify the modeling result and develop potential mitigation strategies. Preliminary, short-duration materials testing has thus-far indicated that several materials may be acceptable for prolonged contact with iodine vapor, motivating longer-duration testing. A propellant loading procedure is presented that aims to minimize the contaminants in the feed system and propellant reservoir. Finally, an 80-hour duration test being performed to gain experience operating the thruster over long durations and multiple restarts is discussed. |
| NASA分類 | Ground Support Systems and Facilities (Space); Spacecraft Propulsion and Power; Propellants and Fuels; Cybernetics, Artificial Intelligence and Robotics |
| レポートNO | M15-4731
IEPC-2015-09
ISTS-2015-b-09 |
| 権利 | Copyright, Distribution as joint owner in the copyright |
|
