| タイトル | Pressure Loss Predictions of the Reactor Simulator Subsystem at NASA GRC |
| 本文（外部サイト） | http://hdl.handle.net/2060/20150021859 |
| 著者（英） | Reid, Terry V. |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2015-07-27 |
| 言語 | eng |
| 内容記述 | Testing of the Fission Power System (FPS) Technology Demonstration Unit (TDU) is being conducted at NASA GRC. The TDU consists of three subsystems: the Reactor Simulator (RxSim), the Stirling Power Conversion Unit (PCU), and the Heat Exchanger Manifold (HXM). An Annular Linear Induction Pump (ALIP) is used to drive the working fluid. A preliminary version of the TDU system (which excludes the PCU for now), is referred to as the RxSim subsystem and was used to conduct flow tests in Vacuum Facility 6 (VF 6). In parallel, a computational model of the RxSim subsystem was created based on the CAD model and was used to predict loop pressure losses over a range of mass flows. This was done to assess the ability of the pump to meet the design intent mass flow demand. Measured data indicates that the pump can produce 2.333 kg/sec of flow, which is enough to supply the RxSim subsystem with a nominal flow of 1.75 kg/sec. Computational predictions indicated that the pump could provide 2.157 kg/sec (using the Spalart-Allmaras turbulence model), and 2.223 kg/sec (using the k- turbulence model). The computational error of the predictions for the available mass flow is -0.176 kg/sec (with the S-A turbulence model) and -0.110 kg/sec (with the k-epsilon turbulence model) when compared to measured data. |
| NASA分類 | Fluid Mechanics and Thermodynamics |
| レポートNO | GRC-E-DAA-TN24632 |
| 権利 | No Copyright |
|
