| タイトル | Additional Results of Glaze Icing Scaling in SLD Conditions |
| 本文（外部サイト） | http://hdl.handle.net/2060/20160010495 |
| 著者（英） | Tsao, Jen-Ching |
| 著者所属（英） | NASA Glenn Research Center |
| 発行日 | 2016-08-01 |
| 言語 | eng |
| 内容記述 | New guidance of acceptable means of compliance with the super-cooled large drops (SLD) conditions has been issued by the U.S. Department of Transportation's Federal Aviation Administration (FAA) in its Advisory Circular AC 25-28 in November 2014. The Part 25, Appendix O is developed to define a representative icing environment for super-cooled large drops. Super-cooled large drops, which include freezing drizzle and freezing rain conditions, are not included in Appendix C. This paper reports results from recent glaze icing scaling tests conducted in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling methods recommended for Appendix C conditions might apply to SLD conditions. The models were straight NACA 0012 wing sections. The reference model had a chord of 72 in. and the scale model had a chord of 21 in. Reference tests were run with airspeeds of 100 and 130.3 kn and with MVD's of 85 and 170 micron. Two scaling methods were considered. One was based on the modified Ruff method with scale velocity found by matching the Weber number WeL. The other was proposed and developed by Feo specifically for strong glaze icing conditions, in which the scale liquid water content and velocity were found by matching reference and scale values of the nondimensional water-film thickness expression and the film Weber number Wef. All tests were conducted at 0 deg AOA. Results will be presented for stagnation freezing fractions of 0.2 and 0.3. For nondimensional reference and scale ice shape comparison, a new post-scanning ice shape digitization procedure was developed for extracting 2-D ice shape profiles at any selected span-wise location from the high fidelity 3-D scanned ice shapes obtained in the IRT. |
| NASA分類 | Aerodynamics |
| レポートNO | NASA/CR-2016-219131
AIAA Paper 2016-3278
E-19255
GRC-E-DAA-TN33583 |
| 権利 | Copyright, Distribution under U.S. Government purpose rights |
|
