| タイトル | X-33 Hypersonic Boundary Layer Transition |
| 本文（外部サイト） | http://hdl.handle.net/2060/20040086858 |
| 著者（英） | Hamilton, H. Harris, II; Berry, Scott A.; Horvath, Thomas J.; Hollis, Brian R.; Thompson, Richard A. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 1999-01-01 |
| 言語 | eng |
| 内容記述 | Boundary layer and aeroheating characteristics of several X-33 configurations have been experimentally examined in the Langley 20-Inch Mach 6 Air Tunnel. Global surface heat transfer distributions, surface streamline patterns, and shock shapes were measured on 0.013-scale models at Mach 6 in air. Parametric variations include angles-of-attack of 20-deg, 30-deg, and 40-deg; Reynolds numbers based on model length of 0.9 to 6.6 million; and body-flap deflections of 0, 10 and 20-deg. The effects of discrete and distributed roughness elements on boundary layer transition, which included trip height, size, location, and distribution, both on and off the windward centerline, were investigated. The discrete roughness results on centerline were used to provide a transition correlation for the X-33 flight vehicle that was applicable across the range of reentry angles of attack. The attachment line discrete roughness results were shown to be consistent with the centerline results, as no increased sensitivity to roughness along the attachment line was identified. The effect of bowed panels was qualitatively shown to be less effective than the discrete trips; however, the distributed nature of the bowed panels affected a larger percent of the aft-body windward surface than a single discrete trip. |
| NASA分類 | Fluid Mechanics and Thermodynamics |
| レポートNO | AIAA Paper 99-3560 |
| 権利 | Copyright, Distribution under U.S. Government purpose rights |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/88509 |
|
